How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

Different Types of Hospitality Management Systems

Hospitality management systems are the software that runs your hospitality business. From the food ordering system in your restaurant, to online accommodation booking software, it enables efficient communication and management of your operation, ultimately increasing revenues.

With a range of hospitality management systems to choose from, understanding what is offered is important in order to find the right system that is tailored for your needs and budget. Depending on the type of operation you manage, you should consider the following systems, their advantages and suitability to your company.

Accommodation management software:

Accommodation software packages range from those aimed at B&Bs and small motel owners to ones for running big hotels, clubs and resorts. The basic package offers simple guest and room management, while the more complex ones cover every aspect needed to manage and run a big hotel chain. This includes reservations, service, retail, inventory, staff roster and training, accounting and much more.

Front desk: A front office software package should enable reception staff to keep track of all bookings, state of rooms, guest details and charges, coordinate restaurant reservations for guests, plan housekeeping duties and process guest check-in and check-out. They should also provide a means to communicate effectively with all travel agents and activity operators linked to the system. Features you should look out for include: Reports for arrivals & departures on a specific date. Guest ledger and reservation details, including activities and special requests. Room rates, discounts, package deals, group bookings, etc. Visual schematic of hotel rooms and status. Visual schematic of calendar with room availability. Facility for printing check-in cards for guests. Flexibility in re-assigning guests to different room. Facility to easily add charges to rooms from restaurants, spa, gift shop, etc. Incorporate all payment options upon check-out and print receipt. Print work roster for staff Facilities for storing guest history Communicate efficiently with reservation and travel agents

Housekeeping/maintenance software: Easy-to-use software for the housekeeping and maintenance departments of your accommodation place will increase the efficiency of cleaning and servicing of rooms. Main features of this module will be: Keeping track of room status – dirty, cleaned, inspected, check-ins and check-outs, etc. All information such as number of guests, number of beds, length of stay, special requests (e.g. baby cot, high chair) should be visible to both housekeeping staff and management. Staff can enter maintenance issues as they arise, and those are automatically sent to the maintenance department. Staff can request cleaning materials and toiletries ordered. Staff can keep track of laundry status for uninterrupted linen supply.

Online reservation system: This software package is essential to any accommodation place. It helps you increase direct online bookings instantly. Prospective guests can view hotel rooms (size, choice of beds), availability and prices, plus services and facilities offered. The systems should have instant confirmation of credit card payments or other secure online payment method. After payment of deposit and confirmation by email, guests should be able to login to view or change their reservation details. Cancellation policies should be stated, airport transport options mentioned.

Hospitality management systems for point of sale (POS) operations: This includes restaurants and bars, the hotel gift shop, spa, tour desk and other guest services. It should have the options of direct payment or charge to room. Apart from recording normal vending operations, it should include issuing daily transaction reports to management or the accounting office, and a daily revenue report.

In the POS sector there are many operating hospitality management systems catering for the food vendor sector, namely restaurants, cafés, takeaway shops and delis.

Restaurant (POS) management packages. For POS management packages, you have the choice of an off-the-shelf system for restaurants and cafes, where you can set the options that suit your operation, or a customised one, specifically configured for your business. Most systems are quite easy to use and are cost effective. Their features vary, but most offer the following: Order taking, tallying, and cashier options using a hand-held PDA system. Credit-card processing interface Receipts customized for your business. The more advanced systems also offer: Integrating all transactions with your accounting software. Full inventory/stocktaking facility Translation facilities to selected languages.

Administration software: This module is directed at top management and offers access to all levels of the organization. It provides instant access to the data base of all sectors, ensuring total transparency of operations Overseeing and early intervention by senior staff can prevent mistakes being made by inexperienced employees and save money and the reputation of your business. · Other facilities in this package may include:

Tools for setting different rate systems for rooms and services: daily, seasonal, special promotions, etc. Statistical data – percentage occupancy over set periods, and other data used for policy making and customized reports for board meeting presentations. Organizing promotions and package deals. Inventory for different departments. Employee accounts and employee training programs

Remember: with the high staff turnover common to the hospitality industry, it is important to choose a system that needs minimal training to use, and has ‘secure areas’, which only authorised personnel (with the proper clearance) may access and use.

Choosing and introducing hospitality management systems for your business is a significant undertaking, both operationally and financially. But once up and running, the system will increase efficiency, cut costs and improve the service in your company. You will have happier staff and happier guests, who will promote your business and ultimately increase your revenue.

Posted in general | Comments Off on Different Types of Hospitality Management Systems

Mortgage Loan Origination Software – 10 Functions of Mortgage Banking

Regardless of a mortgage lending organizations’ size, mortgage loan software, data security solutions and automation tools and services should be able to assist with mortgage loan automation requirements. In today’s chaotic mortgage lending environment origination and document security systems need to be easily configured to emphasize a company’s special needs and increase efficiencies across all aspects of the loan origination process, allowing lenders to increase quality and productivity.

Technology-driven automation is the key to succeeding in the increasingly complex, deeply scrutinized mortgage industry. Web-based (Software-as-a-Service), Enterprise mortgage software that supports the ten primary functions in mortgage banking will provide lenders with the necessary competitive advantages to succeed in today’s mortgage industry.

Ten Primary Functions in Mortgage Banking

  1. Mortgage Web site design, implementation, and hosting to provide product, service, loan status, and company information to mortgage customers and business partners
  2. Online loan applications for gathering information from borrowers and business partners that issue loan terms, disclosures, and underwriting conditions
  3. Loan origination software for managing loan data, borrower data, property data, general status reporting, and calculations
  4. Interface systems to send and receive data from real estate service providers, such as credit reports, flood determinations, automated underwriting, fraud detection, and closing documents
  5. Internal automated underwriting system that is simple enough for originators and sophisticated enough for underwriting portfolio loan products
  6. Document generation for applications, upfront disclosures, business processes, and closing documents
  7. Integrated imaging that is used from loan origination to investor delivery and for file archiving
  8. Interest rate and fee generation along with program qualification guidelines
  9. Secondary marketing data tools to track loan revenue and investor relationships, including warehouse line management and interim servicing to complete the back-office system
  10. Reporting such as loan delivery, year-end fee reporting, and HMDA reporting for loan application disposition

Web-Based, enterprise mortgage software that supports the ten primary functions of mortgage banking simplifies compliance, maximizes operational efficiencies, and increases profitability.

Posted in general | Comments Off on Mortgage Loan Origination Software – 10 Functions of Mortgage Banking

The Advantages and Disadvantages to Bug Tracking Software

Bug tracking has been around as early as the 1940’s, just not in a software form. In these early days, simply using a pen and a paper created tracking systems. It evolved from then to using spreadsheets. Now there is bug tracking software like the defect tracking tool and even more specific programs like Mantis and Bugzilla, just to name a couple. As with anything that evolves however, there will always be those that are 100% for the programs and those that are against it. This article will cover all claims – both positive and negative – of bug tracking software like the defect tracking tool.

The Positive Claims

It certainly depends on the type of bug tracking software that is used, but it seems as if there are many more advantages to these tools than disadvantages. The most obvious advantage is that these types of tools allow companies to keep a record of the issues that are recorded, who fixed them, and even how long it took to fix the issue for some types of programs. Customers are encouraged to be as detailed as they can be when requesting that an issue be fixed so that companies can complete their requests as quickly as possible. The fact that the issues are recorded and saved is a huge benefit for the companies because sending the recorded bug list with the purchased software is a common practice. This is a benefit to customers because if it is a common error, they can simply look up this issue in the previously recorded bug list. However, if the list is incredibly long (a common disadvantage) it can become more of a hassle.

The Negative Claims

As with anything that has a list of positive aspects there is also a list of negative aspects, though there are few. One of the biggest complaints is not so much from the bug tracking software or defect tracking tool itself but more from the process of submitting issue requests. Customers need to be extremely detailed with their issue requests if they want a detailed response. Miscommunication isn’t a fault of the product, the customer, or the company – it’s simply something that happens. Customers and companies alike both need to remember to be patient with each other and to treat each other with a mutual respect. A second complaint that was previously mentioned is the length of issues in some of these software programs.

Some customers don’t have the patience to look through a long list of software issues that have been previously recorded and this causes frustration among the companies that took the time to purchase software that saves them. The length of issues that are submitted can also become a problem because if there are too many issues submitted and not enough engineers to address them, some can get overlooked. Nobody likes to be forgotten, but usually these types of bug tracking software include detailed instructions and are easy to use.

Usually when a company purchases a bug tracking software or defect tracking tool it already has an experienced IT department in place. Whatever the software is that is being used with these programs should have some sort of backup for when the work is completed so it does not get lost if the issues that occur are deadly.

Posted in general | Comments Off on The Advantages and Disadvantages to Bug Tracking Software

10 Top Reasons Why I Have to Upgrade My Computer

The rate at which technology is improving is very fast and in the time you get comfortable with the computer hardware you have bought, several new and improved models appear in the market. While some people prefer to keep their computers state of the art, most of us have a 'If it is not broken, do not fix it' attitude when it comes to upgrading or replacing our computers.

This is a strategy that could prove expensive in the long run. It is always better to upgrade your computer on a regular basis, especially if you have had it for over 2-3 years. Even if your computer has had a large trouble-free existence, you really need to consider periodic upgrades and here are the reasons why you must dos so:

1. Increase in Processing Speed ​​- This is one place where you really get to notice an improvement in performance. If you are upgrading from a Celeron 433MHz processor to a Pentium 4 1.6GHz, you would really notice the difference in performance!

2. Faster Memory Access – Improvements in CPU speed are typically accommodated by improvements in the speed at which data transfer occurs between the CPU and RAM. This is another area that provides an improvement in performance.

3. Size and Capacity improvements – Technology drives a reduction in component size coupled with an increase in storage capacity. This means that a RAM card or hard disk of the similar size as the older ones in your computer could have double the capacity!

4. Software Compatibility – Many of the new software packages you may wish to use in order to improve your productivity or entertainment experience may not function well on you old computer. It is better to upgrade your computer to enjoy the benefits of new software fully.

5. Obsolescence of Hardware – As your hardware gets older; Getting a replacement will get more difficult once manufacturers start phasing out the production. With improvement in technology, the older hardware becomes cheaper initially and becomes expensive as supply dries up.

6. Technical Support Issues – Many manufacturers stop providing technical support for older components as they cease production. The older your computer gets, the harder it is to find help in fixing it when it malfunctions.

7. Development of New Hardware – New hardware products appear in the market frequently that revolutionize your computer experience and are based on newly developed technology. The chances of your old computer supporting new devices are very low.

8. Faster Devices – Your old computer may not be in a position to accommodate the speed at which the new devices communicate.

9. New, Fast Communication Protocols – You may not be able to implement new or faster communication protocols in your old computer because the hardware is unable to support them.

10. Operating System and File Format – Your old hardware may not be able to run newer operating systems and some of the file formats may not be supported.

Posted in general | Comments Off on 10 Top Reasons Why I Have to Upgrade My Computer

Determining the Best Type of Fastener to Use For Outdoor Furniture Construction

If you want to learn about selecting hardware for your next outdoor furniture project, then you'll want to read this article. Specifically, I'll be telling you about what type of hardware will perform best, why the type of metal used for fasteners and the finish used are important considerations, and how properly protecting or limiting exposure of your furniture to wet and winter conditions can increase Life span. After you're done with this article you will understand that the best choice of hardware for your outdoor furniture project is dependent on furniture style, material used for construction, selected location for the furniture and budget.

Selecting proper hardware for your furniture will help ensure a long life span, as well as improve the overall appearance of your furniture. Part of the problem is knowing what hardware to select when there are so many options available at the hardware store. The typical Lowes or Home Depot carries a huge selection of stainless steel, hot dipped galvanized, bright galvanized, plain steel, coated steel and brass bolts, nuts, washers and screws. Each type of fastener is suitable for certain applications, but not all are ideal for outdoor furniture applications.

In fact, choosing the wrong fasteners can greatly shorten the lifespan of your furniture, contribute to rot of wood furniture, cause unsightly staining, and even make your furniture unsafe to use.

One thing that needs to be noted right up front is, do not ever use unprotected steel fasteners for outdoor furniture, they will rust very quickly, and the steel will react with the tannic acid in the wood causing streaks and staining. The tannic acid actually speeds up the corrosion of the fasteners. Have you ever seen a wooden fence with black streaks running down the boards from the nails? This fence was installed with the wrong type of fasteners. The same thing will happen to your furniture. Even worse, as the fasteners rust, they will speed up the decay process of the wood around the rusted fasteners, ruining your furniture and making it potentially unsafe to use.

Hot Dipped Galvanized

Screws and bolts treated by hot dipped galvanizing are specifically designed for use outdoors. Electroplated galvanized or bright galvanized fasteners will very well not hold up as well as the hot dipped galvanized hardware. Zinc is used as a coating in both methods, and acts as a barrier against the elements and the tannic acids in the wood.

I strongly recommend only using screws or bolts in the construction of outdoor furniture, however. The galvanized finish on nails, either electroplated or hot dipped, can easily become damaged while hammering them in, exposing the nail head to the elements and allowing them to begin rusting quickly.

Adequate care must be taken when installing galvanized screws. Drill pilot holes in hardwoods, and be sure to use a bit that is not worn and intolerable to skipping in the screw head. For whatever reason, the galvanized screws seem to not be as well tempered as other steel fasteners, and are more likely to either snap off or have the heads strip out while installing them. Due to the permission required for the hot dipped coating, galvanized bolts do not have as tight of tolerance on the threads, and are more likely to strip if over tightened.

Hot dipped galvanized fasteners are a fine choice for many outdoor furniture applications, including Adirondack Chairs, but are not the best choice for use in woods, such as teak.

Stainless steel

Stainless steel is the best choice for use in woods with higher levels of tannic acid, such as teak. Stainless steel is an alloy or blend of steel, nickel and chrome. The ratio of the other metals with the steel determine the weather and corrosion resistance of stainless steel. Because the steel is mixed with other softer metals, the stainless steel is not as strong, so predrilling of screw holes is highly recommended in all applications, and essential in hardwoods such as teak and mahogany. The added corrosion resistance more than outweighs any shortcomings that the metal may have, especially in outdoor furniture applications.

While stainless steel fasteners are the most rust resistant, they are also the most expensive of the options we are discussing. However, using stainless steel fasteners will add years of life to your furniture. In the respect, they are an investment that will pay out for years to come.

Brass

I have seen brass used in some commercially produced outdoor furniture, but do not recommend it. While brass does not form red rust, and is well suited for many wet applications such as toilets and sinks, it does tarnish and corrode. It is also very susceptible to the tannic acids in wood, which will cause it to fail more quickly. Brass screws in particular Do not have sufficient strength for outdoor furniture applications.

Outdoor or deck screws

In the past several years a number of manufacturers have introduced outdoor fastening products specifically marketed for deck building. These will typically be green, gray, tan or brown. These screws are either ceramic or plastic coated to delay the metal reacting with the wood acids. The specific coating methods are proprietary to each manufacturer, and can be a combination of electroplated galvanizing and plastic, or a baked on ceramic.

I have used these fasteners in furniture applications and they perform just fine. Unfortunately, I have not come across bolts with this type of finish. The brand of screw I used was Deck Mate, and they were available in tan and brown, so that the color can be selected to better match the wood being used. These screws are ceramic covered, and the manufacturer provided a coated bit for installation, which was designed to not damage the ceramic coating at the screw head. If you choose this type of fastener, be sure to compare the cost with stainless steel, as the price will vary. If the stainless steel is reasonably comparable in cost, it would be the recommended fastener.

Always be sure to read the manufacturers specifications on the box to be sure that the screws are suitable for your application.

Other Considerations

If you are building furniture that will be located on a covered porch or patio where it will be protected from the elements, the concern will be the interaction between the wood and the fasteners, much more so than the weather. Furniture that will be exposed to the elements all year, such as a garden bench, or an adirondack chair in the corner of your garden, will have to be constructed with much more care and concern to ensure that they hold up more than just one or Two winters.

Additional considerations must be made beyond just the choice of what type of fastener to use, though this is very important. For example, fasteners should not be located where water where collect and sit on the fasteners for an extended period of time. The screws that attach the seat slats to an Adirondack chair are a prime example- typically these screws will be countersunk below the surface of the wood. This will allow water to collect in the screw holes, shortening the life span of all but stainless steel fasteners, and prolonging the exposure of the wood to water, which will increase the rate of decay. In applications where the furniture will be exposed to the elements year round the screw heads should be driven flush with the surface of the surrounding wood.

Construction and design of the furniture are also important considerations. Are the horizontal surfaces of the furniture constructed in such a way that will allow them to shed water, rather than collect it? Think of a picnic table with a slatted or board top. The gaps between the boards allow water a way to run off the top and not pool up.

Conclusion

Stainless steel is usually the best choice for outdoor furniture applications, although the cost may be prohibitive for some. There are other less expensive fastener options available that will perform acceptably. Do not use unprotected steel fasteners for outdoor furniture applications under any circumstances. Know where and how you intend to use your furniture and design it for the conditions it will be subjected to.

Posted in general | Comments Off on Determining the Best Type of Fastener to Use For Outdoor Furniture Construction

Medical Coding History – From Paper to Medial Coding Software

If we define medical coding as the assignment of alphanumerical characters to diagnoses, diseases, and treatments, then medical coding has been traced back to the 1600s in England with the London Bills of Mortality. A more standardized system of coding was developed for classifying death at the tail end of the 19th century. In 1893, Jacque Bertillon, a statistician, created the Bertillon Classification of Causes of Death, a system which was eventually adopted by 26 countries at the beginning of the 20th century. Shortly after the Bertillon Classification system was implemented, people began discussing the possibility of expanding the system beyond mortality as a way of tracking diseases.

By the middle of the 20th century, the World Health Organization (WHO) adopted a goal of a single global classification system for disease and mortality, entitled the International Classification of Diseases, Injuries, and Causes of Death (ICD). This classification system is updated every 10 years. The latest revision, ICD-10, is scheduled for adoption in the United States in 2013.

What started out as a small set of medical codes has evolved into a complex system that was initially standardized by the American Medical Association back in 1966 with current procedure codes (CPT) codes that are updated annually.

In the late 1970s, the Healthcare Common Procedure Coding System (HCPCS) was developed based on CPT. HCPCS has three levels of codes: Level One is the original CPT system. Level Two codes are alphanumeric and include non-physician services such as ambulances and other transportation as well as patient devices such as prosthetic devices. Level Three codes were developed as local codes, and were discontinued in 2003 in order to keep all codes relevant worldwide.

Recently, medical coding systems have been expanded to include other medical specialties. For example, there are coding systems related to disabilities, the dental field, prescription drugs, and mental health.

As the coding systems have become more complex and diverse, the need for training of medical coders has grown exponentially. Private training schools and public colleges throughout the country have developed certification programs. In order to be awarded a certificate, students must obtain a two-year degree from an accredited medical coding school and pass an exam given by the AHIMA.

Over the past 20 years, many coding processes have shifted from a paper-based system to a computer-based system using medical coding software and medical billing software. Many companies sell complete medical software-based coding solutions and myriad of products for specific medical disciplines, such as products that are specifically tailored to skilled nursing facilities, physicians, hospitals, surgery, cardiology, and more.

As medical facilities and professionals begin preparing for the conversion to ICD-10 in 2013, the need for more sophisticated medical coding software solutions and qualified medical coders will continue to grow.

CPT is a registered trademark of the American Medical Association.

Posted in general | Comments Off on Medical Coding History – From Paper to Medial Coding Software

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

What is the Argus Safety Database?

The Argus safety database is a key part of the Argus Safety 3.0.1 pharmacovigilance software system. In a nutshell, pharmacovigilance is defined as the monitoring of any possible adverse effects of both herbal remedies and synthetic drugs as they are used.

The digital database is used to help companies ensure compliance with global regulations regarding pharmacovigilance and related activities. As a comprehensive pharmaceutical software system, it supports pharmacovigilance business processes that take place in both the pre- and post-marketing phases.

The Argus database is hosted in a data center that is ISO-9001-certified, and operates according to the security standards promulgated by FDA guidelines. By managing this data center, a pharmaceutical firm or laboratory may obtain maximum physical data security as well as access to effective data backup and recovery procedures whenever these services are needed.

ACCOVION, the full-service contract research organization that offers pharmacovigilance as a core service, has configured the Argus database with customized and validated rules to expedite safety reporting. This setup enables generated safety reports to be sent to regulatory investigators and central ethics committees.

The system covers a wide range of the most commonly used forms, including the American FDA MedWatch 3500A form for drugs, the VAERS form for vaccines, the CIOMS-I form, and many others utilized in European countries.

The standard setup in use by the Argus safety database system includes coding with current World Health Organization and MedDRA data dictionaries, as well as older versions of these dictionaries and many others to meet user requirements.

Posted in general | Comments Off on What is the Argus Safety Database?

Advantages and Disadvantages of Biometric Time and Attendance Software

First of all let me ask you what you understand by time and attendance software? Have you ever been asked to log in as soon as you enter office and the main gate of the office has a Biometric machine that takes in your finger prints and allows you to enter the office premise? Yes, these are the time and attendance software being installed in a company.

Biometrics consists of methods for uniquely identifying a person (human being) by his/her physical or behavioral traits. There are many biometric software available in market for such purpose and their use is widely known. One such use is Biometric time and attendance management software.

Those days are gone when we had to punch in cards or sign into a register to tell the other person that we are present. Just as paper checking has been changed from manual to computerized, identifying a person and letting him in your office has been changed from manual to biometrics.

There are many benefits of having such methodology in your office. Such as:

• Accurate timing: When a person looks at his watch and enters the time there is a slight chance that he may see the wrong timing and write. Whereas with biometric time and attendance software there is no possibility of such mistake. The user does not need to see or check the time, it automatically gets logged in.

• Less error: There is no scope of human error here.

• Profit to company: If it’s accurate and correct the company will definitely gain from it.

As everything has a good and bad side this too has its disadvantages, such as:

• Extra cost to company: Biometric software and machine cost a lot more, so installing such software need a good investment money wise.

• Extra management: Remember when every employee is logging his own timing when he comes or leaves; there is no extra management here. But, if you are putting a machine there has to be taken some care of it.

Biometrics time and management software is really helpful when creating payrolls for employees. Once a definite timing has been registered you don’t need to think twice before creating the employees pay.

Many homes are also using such kind of software to have a safe and secure home. Biometric software is really helpful when you need security in your home as well as in office. There are many companies all over the world providing such biometric time and attendance software. You just need to keep an eye on the technologies and websites that are providing you these.

Posted in general | Comments Off on Advantages and Disadvantages of Biometric Time and Attendance Software